How often should I sealcoat my asphalt?

We recommend sealcoating every 2-3 years, depending on traffic volume and weather conditions. New asphalt should be sealed after 6-12 months.

What weather conditions are needed for sealcoating?

Sealcoating requires dry conditions with temperatures above 50°F. The forecast should be rain-free for at least 24 hours after application.

How long before I can use the sealed surface?

The sealcoat typically dries to touch in 2-4 hours, but we recommend staying off the surface for 24-48 hours for complete curing.

How often should I have my asphalt sealcoated?

Every 2-3 years for residential properties, 3-5 years for commercial properties. The optimal frequency depends on traffic volume, weather exposure, and the quality of previous applications. In East Tennessee's climate with significant temperature fluctuations and UV exposure, residential driveways benefit from sealcoating every 2-3 years. Commercial parking lots with professional-grade applications can extend this to 3-5 years. Signs it's time to reseal include fading to gray color, visible aggregate showing through, minor surface cracking, or loss of water beading.

What's the difference between coal tar and asphalt emulsion sealers?

Coal tar sealers offer superior resistance to oil and gas damage, while asphalt emulsion provides enhanced flexibility and environmental compliance. Coal tar sealers contain 20-35% coal tar pitch and provide excellent resistance to petroleum products, making them ideal for driveways and parking areas where vehicles leak fluids. They maintain their rich black appearance longer and offer superior durability. Asphalt emulsion sealers use 35-50% asphalt cement and provide excellent flexibility for areas with temperature fluctuations, plus they meet environmental restrictions where coal tar use is limited.

Can sealcoating be applied over existing sealed surfaces?

Yes, when properly prepared and in good condition. Existing sealed surfaces can be resealed when the previous coating is still adhering well but showing signs of wear. The surface must be thoroughly cleaned, and any peeling or delaminated areas must be removed. Oil spots require special priming, and cracks should be filled before application. If the existing sealer is severely deteriorated or peeling extensively, it may need to be removed before reapplication for optimal results.

How long does the sealcoating process take?

1-3 days total depending on project size and complexity. Residential driveways typically require 1-2 days (preparation and application) plus 24-48 hours cure time. Commercial parking lots may take 2-3 days for application plus cure time, especially when including striping restoration. Weather conditions affect timing - optimal conditions speed the process while marginal weather may extend cure times. We provide detailed scheduling during the estimate process.

What weather conditions are required for sealcoating?

Temperatures between 50-85°F with no rain expected for 24 hours after application. Ideal conditions include ambient temperatures between 50-85°F, pavement surface temperature below 150°F, humidity below 85%, and no precipitation forecast for 24 hours. Light wind (under 15 mph) is acceptable and can actually help with drying. In East Tennessee, late spring through early fall provides optimal conditions. We monitor weather forecasts closely and may reschedule if conditions aren't suitable for quality results.

Sealcoating in Jonesborough, TN

Name: Hyder Paving Company
Rating: 5

Professional sealcoating for Historic Downtown, Cherokee Hills, Conklin and all of Local County

Licensed & Insured•50+ Years Experience•Call (423) 589-1112

What is Sealcoating?

Looking for reliable sealcoating services in Jonesborough, Tennessee? Whether you're near International Storytelling Center or in the Cherokee Hills area, Hyder Paving Company has been the trusted choice for local County residents for 38 years. From historic main street projects near Downtown Jonesborough to residential work in Cherokee Hills, we've built our reputation on quality and reliability. Our 38 years in Jonesborough have taught us how to handle the area's 50 annual freeze-thaw cycles and frequent freeze-thaw cycles in winter and hot, humid summers. We've perfected techniques for historic preservation requirements and tourism traffic, ensuring your sealcoating investment withstands Jonesborough's unique climate challenges. Our expertise with limestone and dolomite base with natural springs means we properly prepare every surface for maximum longevity. We understand natural spring management and historic guttering systems, implementing proven solutions that protect your investment. Contact us today for a free consultation and discover why Jonesborough property owners choose Hyder Paving Company for lasting results.

Professional sealcoating and asphalt protection services

Service Focus

Choose your application type for tailored information

Residential

Residential services

Commercial

Commercial services

All content is dynamically optimized based on your selection

MATERIALS